Rolling Bat – A Story – 4

So far we have seen the process of rolling a composite bat and the equipment used to do it. Now let’s take a little look at the beginning of both, and how it has evolved.

compound bats

Composite bats were originally introduced to the playing public in the early 1980s, in the slow pitch softball segment of the sport. At that time, the aluminum bat was the best seller and outperformed the wooden ones that had been used until then. It turned out that the aluminum bat also outperformed the new composite bat, so the composite bat did not gain much favor among game players. But in 2001, with advances in technology and materials, the Louisville Slugger won “Best Performance” with its newly designed composite bats. And that’s when the bat wars began, because in 2002 Miken also introduced its newly designed composite bats. From then until now, technology has grown by leaps and bounds, and all bat manufacturers are producing composite bats. Not only are they using the woven glass fibers as a composite material, but they are also using carbon, graphite and kevlar to make the new high performance bats. These technological advances have also led to rule changes to ensure player safety is maintained.

Advantage

There are five main advantages to the composite bat over its rivals. They are, oscillating weight, bending stiffness, bending vibration, trampoline effect, and lastly, sound. Swing weight is reduced because it is much easier to move the center of mass of the bat closer to the shaft in the composite bat production process. This is also true for bat stiffness and handle vibration, due to the different types of materials they can use. By altering these materials, they can alter rigidity and vibration. The trampoline effect can be increased due to the physics of elastic collision, also determined by the application and procedures and the application of different materials. And finally the sound. The composite bat gives a much more solid sound than its aluminum brother.

the irruption

When the composite bat came onto the market, after a period of time, it was discovered that with more use, the bats actually performed better. They hit harder and less vibration was transferred to the handle. Now, bat manufacturers suggest a rest period of 500 to 600 strokes before the bat reaches its designed BESR, or ball-exit velocity ratio. In 2002 this idea was totally new. So if today’s rules state a maximum BESR of 98 mph, a new bat straight out of the wrapper can only have a BESR of 92 or 93 mph to allow for the break-in process and the bat reaches its peak performance. Batting has become popular because it speeds up this process and eliminates much of the wear and tear of hitting 600 balls on a bat.

How the filming began

In California some guy, probably a machinist, used a metal training motto called the English Wheel to help his bat work better. An English Wheel is a large piece of equipment that has two large convex steel wheels, about 8 inches in diameter, set one on top of the other. Used to form metal, these wheels can be brought together using a foot pedal to determine how much pressure is applied to the metal during the rolling or forming process. So this guy placed his bat between the rollers, moved it in and out, twisted it around, and continued the process around the barrel of his bat. Thus, the rolling cam of perpendicular bats becomes a reality. After this, a much smaller motto was made, using nylon rollers. and a clamping motto to apply the necessary pressure to loosen the fibers of the bat.

How about rolling in parallel?

In 2006 or 2007, a guy from Michigan introduced the first parallel vane rolling machine, which was more advanced than perpendicular rollers. I had two 7-inch polyethylene rollers. establish parallels to each other, in a very precise clamping coin. It had four independent clamping adjustments instead of a single central adjuster to control clamping pressure. The bat was positioned between the reels using a registration coin, to ensure it was straight, and by turning the reels and using the 4 fine adjustment adjusters, the barrel of the bat was fully rolled in just a few sequences. However, his motto could also be used to roll the bat perpendicularly, thus having the best of both operations. And thus the parallel laminating machine was introduced.

other methods

Before and even after bat rolling machines became popular, other highly creative methods were used to accomplish the rolling process. However, they were not as effective. A common bench target has been used to compress and tighten the barrel of the bat. It was effective but it caused the bat material to break and fail due to a lack of consistency. An inventor devised a similar method using a hydraulic car jack attached to a clamping device with similar results. Some have used a heavy mallet to hit the barrel of the bat, and someone also thought of putting a baseball on the handle end of a hammer to hit the bat. In my slow pitch softball playing days, I’ve seen guys pummel a telephone pole and a large, towel-covered steel fence post with their bats to try to break them, or maybe knock them out.

The evolution

So we had the dedicated perpendicular and the new perpendicular or parallel rolling machines. The guys with the perpendicular coins saw that they were at a disadvantage and fell behind, so they redesigned their machines so they could use both methods as well. Some added a second roller at the top or bottom to make it easier to position the bat parallel to the rollers. They also added a very simple handle to the center compression adjuster and also to the rotating roller. So that brings us to where we are today.

I’m sure new coins will be invented to speed up the compound bat breaking process. With changing rules and new bat construction and technology, new methods may have to be devised. I already have two new ideas on the drawing board if necessary. I expect one to be about half the price of existing laminating machines, and the other may have to be half as expensive. I guess we’ll have to wait and see what happens with the rules and the market.

Leave a Reply

Your email address will not be published. Required fields are marked *