Blend with the Ninja Blender
1. Follow the assembly instructions. If you have not already done so, you must assemble your mixer before using it. See the instructions that came with the package for instructions on that specific area unit for your Ninja model. Usually you will need to place the jar on the bottom and then place the stacked blade assembly onto the shaft.
2. insert the Ninja mixer. Your mixer will not work unless it is clogged. Make the string and plug it into a socket in your room. confirm that it cannot be simply unplugged at your location
Open the lid. look for an oblong button at the top of the cap. This button should say “release”. Press the button to open and remove the lid.
4. Add your ingredients. Fruit and vegetable zone unit ideal for use inside the blender. will produce any combination of ingredients that the area unites tasty for you. If you are using a fruit such as a banana or an orange, be sure to peel it before spinning it in the blender. Most fruits and vegetables don’t necessarily need to be mashed unless they’re big enough to fit in the blender, but chopping them up first helps the parts live. confirm that the lid is closed before selecting a setting.
1. However, you should not use hot ingredients in the blender.
2. You will put ice cubes or frozen fruit inside the blender, but they will pierce the blades. Let the fruit thaw for a few minutes before adding it to the blender.
5. choose a configuration. will opt for the heartbeat setting for chopping and processing. Or, you’ll opt for speed one, 2, or 3. Speed one mixes, speed two mixes, and speed three chops ice. Hold down the button to activate the mixer. Keep it pressed until you are satisfied with the consistency of your ingredients.
• The Pulse setting means the mixer can run at its fastest speed, however it will stop mixing once you release the button for the heartbeat setting.
6. Use the only service option. Some Ninja models have a service option. the single serving option means it will be enough for just a portion of anything you want to make. If it’s yours, remove the carafe and insert the mug. Then add your ingredients. Press the only serve option to mix
Ninja Blender Cleaning
1. Wash the caps and blades below the situation. Food will settle inside the lids and blades over time, which can cause mold. wash the caps and blade assembly under the case once every use. Be more careful once you handle the blades. they are terribly sharp.
2. Wash the pitcher by hand. Use a mild, mild dishwashing soap to wash the pitcher and/or cups. Use a sponge to clean up food particles. Then wash off the soap residue with hot water.
3. Use the dishwasher. Although hand scrubbing is recommended, the pitcher, cups, lids, and blade assemblies are dishwasher safe. place the blades and lids in the highest rack of your dishwasher. It doesn’t matter where you put the pitcher or cups.
• Cups, lids and blade assemblies are dishwasher safe, but hand washing is recommended as this is the gentlest method of cleaning.
3. Clean the bottom of the mixer. the bottom of the mixer could get dirty or stained over time due to the ingredients born. Wipe the bottom with a clean, damp cloth. do not get the cord or any wall plug wet
Repair of a flashing red light weight
1. Check that the lid is closed properly. A flashing red light can be a common issue with Ninja Blender. Your mixer will not work if the red light is flashing. To fix this problem, first check if the lid is closed. The mixer will not work unless it is closed and secured. The mixer is not attached until it has been pushed down into the instrumentation
2. Confirm that the white arrows on the mixer area unit are aligned. If the lid is closed but the red light is still flashing, check the arrows on your mixer. There should be a white arrow on the cap and handle. These arrows must be aligned for the mixer to calculate. Move the lid until the white arrow on the lid lines up with the arrow on the handle. Then check if the red light has stopped flashing. If so, you will use the blender.
3. Match the jar to the bottom of the blender. Another possible reason for a flashing red light is if the jar is not properly aligned at the bottom. If it has been aligned correctly, it should be able to rotate. The jug simply won’t turn if it hasn’t been placed correctly on the bottom. Remove the pitcher and place it back on the bottom to determine if this is the problem.
• If the red lightweight still does not escape, please contact Ninja mixer customer service for recommendation.
Read more about the best Ninja Blender reviews